P12 Series

The P12 Ironless Linear Motor is the smallest dual-magnet U-channel motor that Airex offers, with a profile of 19.05 by 38.35 mm.

Request Quote

p12-ironless

The P12 Ironless Linear Motor offers precision and high performance within a compact 19.1 mm (0.75”) by 38.35 mm profile. The magnet track is supplied with counterbored through holes while the motor coil has provisions for either side or top mount configurations. A high flex 5-conductor shielded cable includes connections for both a delta or wye connected three-phase motor coil and optional positive or negative temperature coefficient thermistor.

This motor is available with four different coil lengths, each with a different force rating. The net travel of a P12 system is equal to the length of the magnet track minus the length of the coil assembly.

Ironless Linear Motors

Features

The P12 Ironless Linear Motor is the smallest dual-magnet U-channel motor that Airex offers, with a profile of 19.05 by 38.35 mm.

  • Compact Design: 19.1 mm (0.75”) width
  • Continuous forces up to95.3 N (21lbs.f), peak forces up to 301 N (68lbs.f)
  • High accuracy & repeatability, zero backlash, fast settling times
  • Efficient thermal performance
  • Velocities greater than 3 M/sec, accelerations greater than 5 G
  • No maintenance, non-contact brushless design & zero magnetic preload
  • Sinusoidal or Hall Effect commutation
  • High performance rare-earth magnets
  • Low-inductance coil for fast response
  • Ironless zero-cogging design provides lowest velocity ripple for smoothest velocity and position control
  • Custom options (thermal sensors, cabling, vacuum/clean room quality) available
  • Simple installation – top/side mount coil and side mount tracks up to 24 inches in length
  • Suitable Applications Include:
    • Multi-tiered stages
    • Semiconductor manufacturing
    • Inspection systems
    • Micro-machining equipment
    • Optical scanning devices
    • Laser machining
    • Electrical component testing

Specifications

specification1_p12
specification2_p12
specification3_p12

Dimensions

For larger dimension is please visit the Airex document library.

DRAWING-COIL

p12-1

DRAWING-COIL WITH HED

p12-2

DRAWING-MAGNET TRACK

p12-3

Ordering Information

ordering_1
ordering_2

Document Library

For full access to our documents, visit our document library.

603.841.2040

connect@airex.com

Request Quote

Document Library

Selection Guide